Let one line pass behind another
Two lines can cross on paper without explaining which object is nearer. Imagine an empty paper sleeve resting partly over an unprinted envelope. A complete outline around both may describe the objects separately but blur their relationship where they meet. The problem is not necessarily inaccurate proportions. It may be that every edge has been given an equal right to continue. An overlap offers a useful reason to interrupt a line. In a small study, the nearer boundary can remain continuous while the farther one stops, leaving the reader enough evidence to understand the arrangement.
Place the two objects on a plain surface and choose a view where the overlap is clear. Avoid arranging them into a perfect symbol; a slight angle gives you something specific to observe. Before drawing, point to the three places where an edge seems to disappear behind another surface. If you cannot identify those places, move your seat or rearrange the objects. The study should answer a visible question rather than rely on a remembered rule about how overlapping rectangles ought to look. Leave space around the pair so the surrounding shapes remain easy to inspect.
Make a light overall placement using only the outermost limits of the combined arrangement. This is one shape for the moment, not two complete outlines. Notice where the exposed surface of the envelope becomes narrowest. That interval can help locate the sleeve without drawing through it. Once the combined silhouette feels plausible, add the sleeve's visible edge. Stop where it reaches the envelope's boundary. Do not immediately reconstruct the hidden corner with a dotted guide. The purpose of the exercise is to discover how much of the relationship the visible evidence can carry on its own.
Now draw the exposed envelope edges, approaching each overlap from the open side. End the stroke just before it reaches the nearer boundary if that keeps the junction clear. A tiny gap may be useful, but it should not become a conspicuous white moat. Its size depends on the drawing's scale and the pencil's width. Try an alternative junction on scrap if the first looks confusing. Compare the two at the distance from which you expect to view the finished sheet. A close inspection can make a harmless irregularity appear much more important than it is.
Some junctions need more than a stopped line. The sleeve may cast a small shadow, or the envelope may bend near its concealed edge. Add only the change you can actually observe and that the study needs. A heavy dark wedge at every meeting point quickly becomes a decorative convention. Instead, compare one junction with a little shadow and another with only an interruption. Ask whether the difference reflects the arrangement or merely your wish to make each corner emphatic. The most descriptive treatment may be the quieter one, especially when the large overlapping shapes are already clear.
For a second study, swap which object rests on top while keeping approximately the same position on the page. Resist copying the earlier line pattern and altering only a single corner. Look again at the exposed intervals and the places where edges disappear. The two drawings should differ because the visible arrangement differs. Write a short label beneath each if you need to remember the setup. This comparison makes a useful check against treating interruption as a universal trick: it works when it follows an actual relationship, not when it is scattered evenly across the drawing.
An uncertain overlap is often easier to repair by removing excess information than by adding darker information. Lay a small blank scrap over a busy junction and imagine the simplest visible continuation. On the next study, omit one unnecessary edge. If the relationship improves, you have found a useful limit for that drawing. If it becomes less clear, restore the relevant edge lightly and inspect the neighboring gap. There may be a placement error rather than a line-treatment problem. Keep those possibilities separate so that repeated darkening does not hide the issue you meant to investigate.
Finish when the pair reads as a connected arrangement from an ordinary viewing distance. A few incomplete outlines are not a failure to finish; they can be an accurate account of what is visible. Keep the two studies together and note the junction that changed most when the objects traded places. That is a more useful record than a general instruction to break more lines. In another subject, the needed boundary may remain continuous. This exercise provides a specific option: when one surface passes behind another, let the drawing's lines acknowledge the same loss of visibility.